The software that controls the machine and converts G-code into pulses that are sent to the electronics. Examples Mach3 and EMC2.
By footloose1952
#725
I have a Stepcraft 300 CNC model, and have only just built the machine, and have down loaded the test version of Mach3, with the intention of buying the full version once I see it work. I also have the UC100 module to connect it to my Laptop via the USB cable. I have not been able to test if the axis motors, moving of the parts actually move. I've opened Mach3, and it doesn't matter what I do, I can't seem to start the axis motors to see if actually move?
Did any others users have this problem when first starting out?
Any assistance with a detailed step by step list of instructions would be greatly appreciated. I a in my 60s and am not really that computer savy.
I thank you in anticipation of any offers of help
Regards from Western Australia
Peter

Steve, Thanks for letting us know. I believe the[…]

What are your DIP switches set to? They can cause […]

CNC electronic questions?

AJ, Thanks a lot for your help,

Testing the 3 Axis Controller

I had replied to your email, but I'll post this he[…]